Manual Handling Introduction

Table of Contents
manual handling course

The purpose of this introduction to manual handling is ensure that you understand the requirements and objectives of current manual handling legislation.

In this introduction you will gain an understanding of the manual handling process and the techniques used. Along with the correct approach to reduce the risk of injury.

Introduction

workplace accident statistics
A third of all workplace injuries can be attributed to accidents involving manual handling. These include work-related Musculoskeletal Disorders (MSDs). MSDs include pain and injuries to arms, legs and joints, along with repetitive strain injuries.

Why is correct manual handling important?

musculoskeletal disorders statistics graph

From the HSE statistical graph, the general trend for musculoskeletal disorders is downwards. This could be attributed to a continual improvement in manual handling training across all sectors. Training is essential as it improves awareness…

  • Awareness reduces risk
  • Shared awareness reduces accidents

Impact on people and business

The main cause for working days lost in 2018 was musculoskeletal conditions (such as back and neck pain), leading to 6.9 million days lost.

498,000 workers are currently suffering from work-related Musculoskeletal Disorders.

A third of all workplace accidents are down to poor manual handling.

musculoskeletal disorders statistics pie chart

Definition of manual handling

Any transporting or supporting of a load by hand or bodily force. This includes the lifting, putting down, pushing, pulling, carrying or moving of any load.

Examples of manual handling

examples of manual handling

Manual handling legislation

Specific manual handling legislation does differ across the United Kingdom.
  • Great Britain
    • Manual Handling Operations
  • Northern Ireland
    • Manual Handling Operations Regulations (Northern Ireland)
  • Republic of Ireland
    • Safety, Health and Welfare at Work (General Application) Regulations

Health and safety legislation

The health and safety acts define specific duties…

Duties

Duties placed on employers, the self-employed, employees, people in control of work premises, manufacturers, designers and suppliers. Requirement to prevent harm to workers and others so far as is reasonably practicable. Health and safety is a everybody’s responsibility.

Manual handling regulations

Where applicable, these regulations place the following duties on the employer and employees:

Employers are required to...

So far as is reasonably practicable, the health, safety and welfare of employees.

Employees are required to...

Take care of themselves and others affected by their acts, or omissions. Cooperate with the employer in complying with the act. Follow any safe system of work or procedures put in place.

General duties

Avoid the need for employees to undertake manual handling operations that involve a risk of injury. Make a suitable and sufficient risk assessment, taking appropriate steps to reduce the risk of injury to the lowest level reasonably practicable.

How much weight can a person lift?

Any person should lift only what they feel comfortable and able to lift.

There is no limit set by the enforcing authorities, they only issue guidelines on how to reduce the risks. Each employer must therefore ensure that all manual handling tasks are assessed (by means of a risk assessment) and suitable control measures are put into place.

Plan and prepare - risk assessment

A suitable and sufficient risk assessment is required to suitably plan and prepare for manual handling activities.

T.I.L.E. analysis

One useful method to plan, prepare and assess a manual handling tasks is T.I.L.E.

Task, Individual, Load and Environment are the four areas to review and establish how best to perform the manual handling operation.

Task in TILE

Step 1 - Why move the load?
Consider why the load needs moving. For example this may be from a storage location to an area where it is needed. Or stock being delivered to a shop or office.
Step 2 - Consider how best to carry out the task
Review all aspects of how the load is to be handled. Review any areas which may require further control measures to reduce the risks.
Step 3 - Who needs to be involved?
Review which employees are required to move the load. Discuss with the employees concerned and gain their feedback on the process.
Step 4 - Are any manual handling aids needed for the task?
Some loads may require additional manual handling aids to be moved safely. Porters trolleys, slings, mechanical lifts.
Step 5 - Where is the load going?
From where and by what route is the load being taken? Are there any obstructions or areas which may increase the risks to the employees? Walk the route and check for any hazards.
Step 6 - How quickly does the task need to be carried out?
Does the load need to be moved within a limited time? Is there adequate time available to perform the task?
Step 7 - How often does the task occur?
The frequency in which the load needs to be handled can affect the risk of injury. High frequency movement can result in repetitive strain injuries.

Individual in TILE

Points to consider about the individual performing the manual handling operation.

Aggravating back pain
Physical activities can aggravate back pain. They can also become more difficult when you have an existing injury. These can include:
  • Carrying objects awkwardly
  • Sudden movements of loads
  • Pulling or dragging excessive loads
  • Stooping, bending over or poor posture
  • Lifting objects which are too heavy or bulky
  • Working beyond normal abilities and limits, and when physically overtired
Best practices
The following diagram is merely a recommendation. This diagram shows the recommended loads to be handled with the marked zones. As discussed previously, the regulatory definition what a person can lift is “any person should lift only what they are comfortable and able to lift”.
manual handling chart

Load in TILE

Points to consider about the load to be transported during a manual handling operation…
  • How heavy are the loads?
  • How much do they weigh?
  • Are the loads being moved frequently?
  • Are the loads bulky or unwieldy?
  • Are the loads difficult to grasp?
  • Are the loads unstable or unpredictable?
  • Are the loads intrinsically harmful? (e.g. sharp / hot)

Environment in TILE

Points to consider about the environment that the load is being transported during a manual handling operation…
  • Are there any constraints on posture?
  • Are the floor surfaces in an suitable condition?
  • Are the variations in floor levels?
  • Is the environment hot, cold or humid?
  • What is the condition of the lighting and light levels??

The hierarchy of control

As with all Health & Safety risk assessments, the hierarchy of control is a very useful tool.

Hierarchy of controls

#1 - Elimination

Hierarchy of controls, elimination

Does the manual handling operation have to be performed at all?

Can the same outcome be achieved without the need for a manual handling operation?

By asking ourselves such questions before starting a manual handling task, we may be able to eliminate the hazard and risk of injury altogether.

#2 - Substitution

Hierarchy of controls, substitution

Can the same outcome be achieved without have to manually handle the load?

Are there lifting tools and/or equipment that could be used to perform this task?

Could an automated transport system be used instead of people?

Analysing substitutes is a great way of finding safer ways to achieve the same task.

#3 - Engineering controls

Hierarchy of controls, engineering controls

For manual handling engineering controls usually focus on ergonomics and the processes that are implemented during the transportation of a load.

For example, using ergonomic benches and table tops the optimised in height to limit bending and stretching.

Engineering controls may also include non slip floors, walkways, trolleys and lifting jacks.

#4 - Administration

Hierarchy of controls, administrative controls

Administrative control measures incorporate training to improve awareness.

As discussed a previous lesson, awareness reduces risks, shared awareness in a workplace reduces accidents. This is why training is so important and should always be a defined administrative control in any manual handling operation.

Other administrative controls include detailed analysis of RSIs (Repetitive Strain Injuries) in line with ART (Assessment of Repetitive Tasks). This usually incorporate the revision of break times to minimise risks associated with repetitive tasks.

#5 - PPE, the last resort

Hierarchy of controls, PPE

As with any strategy to control hazards within the workplace, PPE is the last resort.

Types of PPE that have become common in the workplace and aid manual handling could include:

  • Steel toe cap boots
  • Protective gloves
  • Protective sleeves
  • Hard hats
  • High visibility jackets

Adding PPE can provide a false sense of security, which can undermine your efforts. Also, the improper use of PPE can increase risks those who are trying to avoid them.

Our advice is be cautious when opting for PPE as a control measure. Always ask yourself this…

“Can I further use the hierarchy of control to mitigate the risks and reduce the requirement for PPE”

Understanding injuries

Many injuries associated with manual handling include…

  • Lower back pain
  • Upper limb disorders (ULDs)

ULDs are problems with the shoulders and arms, including the forearm, elbow, wrist, hand and fingers.

Musculoskeletal Disorders are short or long term manual handling injuries.

Short term / superficial injuries

plaster for short term injuries
  • Cuts
  • Bruises
  • Sprains
  • Tears
  • Small fractures
  • Muscle strain
Usually caused by sudden and small unexpected accidents. e.g. losing grip and dropping a load, lifting an excessively heavy load at an awkward angle, or falling while carrying a load.

Long term injuries

Long term injuries mainly involve damage to the musculoskeletal system of the body, including…

long term injuries
  • Muscles
  • Tendons
  • Bones
  • Joints
  • Ligaments
  • Nerves
  • Blood Vessels

These injuries are usually caused by long-term, gradual wear-and-tear as a result of repetitive strenuous activities or incorrect handling techniques.

Overexertion

‘To overexert’ is defined as to strain, or put too much pressure. The injuries caused by overexertion are serious and account for over 6.9 million working days lost each year. Pushing your body past its limits can lead to physical exhaustion, fatigue, and hypoglycemia, among other serious injuries.

Overexertion is a common cause of accidents resulting in injury. Injuries resulting from overexertion can be easily avoided with simple preventions.

Physical overexertion

Physical overexertion is a common cause of injury. These injuries are typically caused by repetitive motion, for example, lifting heavy items or working in an awkward position. These injuries often cause acute pain, and without proper treatment, this acute pain can lead to chronic pain and lifelong problems, such as carpal tunnel syndrome and osteoarthritis.

Fatigue

Pushing your body or mind too hard for too long can leave you feeling fatigued and exhausted; a lack of quality sleep is another common cause of fatigue-related injuries. Sleep is essential to your health; it allows your body and mind to recharge, heal, and develop properly. Inadequate sleep can have severe impact on the body including increased risk of mistakes and accidents, increased blood pressure, and decreased cognitive functions.

Hypoglycemia

Forgetting to eat, or not eating proper meals, can contribute to overexertion and can cause hypoglycemia (also known as low blood sugar). The symptoms differ from one person to another and can range from mild to severe, but can include headaches, confusion, tiredness, and more.

More serious issues, including coma and death, can arise if you have an underlying condition, such as diabetes.

Prevention of overexertion injuries

The good news is that most injuries related to overexertion are preventable. Approximately 20% of injuries are associated with pushing and pulling work demands.

Research has shown that most of these overexertion “accidents” are caused by the “unsafe acts of persons”. This is as opposed to “unsafe mechanical or physical conditions.” Human failure such as poor body mechanics is the main cause of accidents.

Prevention of physical overexertion

  • Lift lighter loads
  • Take frequent breaks
  • Stretch regularly

Prevention of fatigue

  • Get 7-8 hours of sleep
  • Reduce caffeine
  • Reduce alcohol

Prevention of Hypoglycemia

  • Eat regularly
  • Carry a healthy snack
  • Manage diabetes

Spinal injuries

To understand the cause of the majority of manual handling injuries you must first understand the spine. The spine has 3 main functions, these are:
  • To protect the spinal cord
  • To allow movement
  • To support the upper body
The spine is the main support for the body, it can easily be damaged by incorrect movement and handling. The interlocking bones in the spine are called vertebrae. The vertebrae protect the spinal nerve system. Between each vertebrae there is an intervertebral disc to allow movement. A slipped disc is caused by a herniated disc that puts pressure on a spinal nerve.

Anatomy of the spine

spinal anatomy

In human anatomy, the vertebral column (backbone or spine) is a column usually consisting of 33 vertebrae.

Each vertebrae is separated by intervertebral discs.

The spine houses and protects the spinal cord in its spinal canal.

YOU ONLY GET ONE BACK!

The spinal nerve

Healthy cervical disc

Your spinal nerve is a mixed nerve, which carries motor, sensory and autonomic signal between the spinal cord and the body.

In the human body there are 31 pairs of spinal nerves, one on each side of the vertebral column.

Spinal disc

An intervertebral disc lies between adjacent vertebrae. Each disc forms a symphysis:
  • To allow slight movement of the vertebrae
  • To act as a ligament to hold the vertebrae together.
  • To function as a shock absorber for the spine.

Slipped disc

The most common injury caused by incorrect manual handling techniques is a herniated/prolapsed/slipped disc.

This occurs when the disc cracks open allowing the nucleus to seep out, in close proximity to the spinal nerve.

This puts pressure onto the nerves resulting in severe pain.

This is often the result of poor handling techniques over a long period rather than a single event.

slipped disc

Correct lifting techniques

Step 1 - Stop and Think

Plan work that involves manual handling…

  • How heavy is the load?
  • Where is it going to be placed?
  • Use appropriate handling aids where possible.
  • Will assistance be required?
  • Remove obstructions, such as discarded wrapping materials.

For long lifts, such as from floor to shoulder height, consider resting the load mid-way on a table or bench to change grip.

Step 2 - Adopt a Stable Position

Stand with feet apart, one leg slightly forward to maintain balance (alongside the load if it is on the ground). Be prepared to move your feet during the lift to maintain a stable posture. Do not wear over-tight clothing or unsuitable footwear; it may make the task more difficult.

Step 3 - Ensure a good hold on the load

Where possible keep the load as close to your body as possible. Use any handles or devices already fitted to the load. Keep the load in balance.

Step 4 - Keep the load close

While lifting keep the load close to your waist for as long as possible. The distance of the load from the spine at waist height is an important factor in the overall load on the spine and back muscles. Keep the heaviest side of the load next to the body. If a close approach to the load is not possible, try to slide it towards the body before attempting to lift it.

Step 5 - Keep your back straight

Slightly bending your back and knees at the start of the lift is preferable to either fully flexing the back (stooping) or fully flexing the hips and knees (full or deep squatting), but should be avoided wherever possible, do not flex any further while lifting!

Step 6 - Avoid twisting or leaning sideways

Avoid twisting the back or leaning sideways especially while the back is bent. Keep your shoulders level and facing in the same direction as your hips. Turning by moving your feet is better than twisting and lifting at the same time.

It's child's play...